Reset MikroTik CRS326-24G-2S+RM

The RouterBOOT reset button has the following functions. Press the button and apply the power, then:

  • Release the button when green LED starts flashing, to reset RouterOS configuration to defaults.
  • Release the button when the LED turns solid green to clear all configuration and defaults.
  • Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers (required for reinstalling RouterOS over the network).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Use Ethernet 1 port when connecting to Netinstall.

SUMBER = https://help.mikrotik.com/docs/pages/viewpage.action?pageId=17956889

sudah saya uji coba & berhasil

Leave A Reply

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *